MG10 10 10 Kanal Audio mixer

MG10XU/MG10

Frequency response

Enter to STEREO OUT

+ 0.5dB / -1.0dB (20Hz to 48kHz), reference rated output level @ 1kHz, GAIN knob: minimum

Total harmonic distortion（THD+N）

Enter to STEREO OUT

0.02% @ + 14dBu (20Hz to 20kHz), GAIN knob: minimum 0.003% @ + 24dBu (1kHz), GAIN knob: minimum

Hum and noise*1

(20Hz to 20kHz)

Same input noise

-128dBu (Mono input channel, Rs: 150Ω, GAIN knob: max)

Residual output noise

-102dBu(STEREO OUT, STEREO LEVEL Knob: Min）

Crosstalk（1kHz) *2

-83dB

Input channel

10 channels; mono [MIC / LINE]: 4, stereo[LINE]:3

Output channel

STEREO OUT:2,PHONES:1，MONITOR OUT:1, AUX[FX] SEND:1

Bus-bar

stereo:1，AUX[FX]，1

Input channel function

PAD (Mono)

26dB

HPF (Mono)

80Hz,12dB / octave

COMP

Single knob compressor Threshold: + 22dBu to -8dBu, ratio: 1: 1 to 4: 1, output level: 0dB to 7dB, attack time: about 25 milliseconds,

Release time: about 300 milliseconds

EQ HIGH

Gain: + 15dB / -15dB, frequency: 10kHz slope

EQ MID

Gain: + 15dB / -15dB, frequency: 2.5kHz peak

EQ LOW

Gain: + 15dB / -15dB, frequency: 100Hz slope

PEAK LED (Mono)

When the EQ signal reaches the distortion below 3dB when the LED is turned on

Meter level

Post STEREO LEVEL Knob

2x7-dot pitch LED level meter

[PEAK, +10, +6, 0, -6, -10, -20dB]

Built-in digital effects

SPX algorithm

24 programming（MG10XU)

USB Audio（MG10XU）

2 IN/2 OUT

USB Audio 2.0 compatible, sampling rate: maximum 192kHz, Bit depth:24-bit (MG10XU)

Phantom power supply voltage

+48V

Power Adapter

PA-10 (AC38 VCT, 0.62A, cable length = 3.6m) or the same grade recommended by DSPPA

Power consumption

22.9W

physical dimension（W× H × D）

244mm×71mm×294mm (9.6”×2.8”×11.6”）

Net weight

MG10XU:2.1kg (4.63 lbs.), MG10：1.9kg (4.19 lbs.)

Include attachments

AC adapter, instruction manual, Cubase AI download information (MG10XU), technical specifications

Optional accessories

Bracket Adapter: BMS-10A, Pedal Switch: FC5 (MG10XU)

Operating temperature

0 to +40℃